How to Get Better Wifi Signal From Neighbor?

Are you searching over the internet to know how to get better wifi signal from neighbor?

Then, reading this post and doing accordingly will be helpful to you.

For one reason or another, you might not be able to get an internet connection from Internet Service Provider. In this situation, it’s great if your neighbors have a wifi connection and share their signal with you. It’s also cost-effective for both of you if you compensate them for sharing their internet.

Unfortunately, while using your neighbor’s wifi you may face some issues due to weak signal strength. You may notice slower data speeds, dead spots or dropped connections, etc. This will not only badly affect your internet uses, but your neighbor’s as well.

So how to resolve these issues to get a stronger wifi signal?

I did in-depth research for you. Thankfully, I’ve explored different ways to minimize interference and improve signal strength.

Continue reading this post to find them.

How to Get Better Wifi Signal from Neighbor- Here are the 10 Tactics

Accessing a high-speed network connection from a distant place such as an outside garage, backyard, or neighbor’s house is a challenge.

But why are you receiving poor wifi signals from your neighbors or any distant location?

First, obstructions between your neighbor’s house and yours

Second, the distance between the neighbor’s router and your device

Third, faulty or outdated router, network hardware, or firmware

The good news is there are various solutions you can try to boost internet signal to detached garage or neighbors’ houses.

After in-depth research, I’ve shortlisted the following 10 ways to receive better wifi signals from long distances. A few of the ways are basic and cost-effective. On the other hand, other hacks may require you to spend some money.

Tips to improve Wireless signal when using Neighbor’s Wifi

1. Find a strategic place to keep your device/ router & clear obstruction

The distance of your connected device or router from your neighbor’s router or access point (AP) plays an important role in receiving a better signal. It highly affects internet coverage.

The first thing you can do is place your connected device in a location so that it can receive a signal from your neighbor’s router without any interference.

Place your device or router as close as to your neighbor’s access point for fewer interruptions. Try to keep your device at a minimum distance from your neighbor’s router.

Additionally, obstruction between your neighbor’s house and yours is another reason for receiving weaker signals. If you have any temporary obstructions between your and your neighbor’s house, try to clear them. For example, if you have your car parked between your neighbor’s house and yours, it may interfere with receiving an internet signal.

Also, never place your router in any discreet or enclosed location as it hinders the wifi coverage and transferability of signals.

2. Use a modern router

Your outdated router with old technology may struggle to connect to your neighbor’s wifi. With an old router, achieving a stronger signal to maintain a speedy and consistent connection is hard.

Consider getting a modern or top-of-the-line router with better specifications. Experts recommend changing both router and modem in every couple of years.

In case your neighbor has an out-to-date router and modem, you might persuade them (if they are friendly enough) to update these.

3. Use a wifi repeater or Range extender

If none of the tactics mentioned above work to boost the signal of your network, a wifi signal booster can be the best option. Wifi range extender or repeater picks up the signal from the range and regenerates it to rebroadcasts throughout your location. Thus, this device improves wifi coverage in your sweat home. Place the wifi extender in a location where you and your neighbor get the strongest wireless signal possible.

4. Install the latest wifi adapter

For better internet performance, your laptop or PC should have the latest adapter installed. In general, laptops and mobile phones are integrated with built-in adapters.

If it’s an older version adapter, it might not have the range to grab signals effectively that many newer adapters or devices have. Having the latest version will let your hardware run at optimum performance levels.

5. Add an External Adapter

If your device doesn’t come with an adapter, add an external one to optimize the performance rate. This part significantly boosts the signal strength to improve the speed. USB adapters are not very costly.

6. Update your network driver and firmware

Outdated firmware and drivers are also responsible for a poor internet signal. The latest driver and firmware on your laptop or PC is essential for optimized connection and better internet performance.

If any update of your driver or firmware is available, don’t miss to download and install it. Importantly, regular firmware update helps in internet security, performance improvements, and to get better features.

Some apps automatically detect and notify the availability of updated drivers. Using those apps can be helpful for you to make the firmware upgrade easy.

Updating the firmware of your neighbor’s router also ensures that his network connection continues to run smoothly. It helps to provide a better range and signal for connected users.

7. Keep your router or connected device away from electronics

You know, wifi uses a specific frequency range. Some heavy appliances and electronic devices share the same frequency range too. The radio signals may interfere with one another.

When Bluetooth devices, microwaves or cordless phones, etc. run close to your router, reception of the wifi signal interrupts. As a result, you may experience poor internet speed.

So, it’s advisable to mount your router far away from these devices. You can place your wifi router high on the wall or top of a shelf to receive better signals.

8. Switch from 2.4 GHz to 5 GHz frequency

In general, wifi uses a 2.4GHz frequency. This lower frequency channel can have a lot of interferences due to technical connections or distance.  Although 5GHz is not commonly used, it offers higher data transmission speeds.

Open the network administrator interface of your device and check the wifi settings on your device. If it allows configuring the wifi settings, you can do it for better performance.

Switch from 2.4GHz to 5GHz will increase the wifi performance by minimizing interference as long as your device is closer to your neighbor’s one. Luckily, this is one of the most efficient and simple ways to boost your wifi speed without spending any money.

9. Directly connect your router to that of your neighbor (if possible)

If your neighbor agrees to give you a wired connection, you can get a better signal through access point mode. It is one of the reliable ways in terms of good signals and reception. You’ll need a cat5 cable to connect router to router.

I’ve already pointed out that in the case of wireless connection, any barriers between routers may adversely affect the signal strength. Removing the barrier may improve the signal strength. However, if it’s not possible to remove the barrier such as a thick brick wall, this wired connection will work best. 

10. Convince your neighbor to set up an outdoor access point

Although it is a wild step, it might give you a stronger signal you can use where you live. If your neighbor is friendly enough, you might purchase the equipment yourself and request him/ her to place an outdoor access point


If I Use My Neighbor’s Wifi Can They See My Search History?

One question may arise in your mind “can my neighbors see my internet activity for shared connection?”

The simple answer is- Yes.

If your data is not encrypted, the person who is sharing his internet service with you can see your search history. In an unsecured connection, whoever allows you to use the internet can monitor all the traffic across your use of that shared wifi connection.

A home router typically can show the report of who is connected on the same channel. Many models even can identify how much bandwidth the connected device is using.

There are many ways the owner can trace your track if you use their shared wifi. For example:

Wifi Watcher: It is software that can show how many devices are connected to your internet network channel. Additionally, it shows the name of any connected devices. If any smartphone is connected, this software even can show its name, model number, and admin name.

Wireshark: By using this utility your internet provider or owner can watch your internet activity. They can even trace which sites you browse. Unfortunately, they can even sniff the password you use on HTT sites.

How to Get Better Wifi Signal from Neighbor on Android?

If you’re using an android phone to access your neighbor’s wifi, you can optimize the signal strength by doing the following:

  • First, you need to find the right access point for connecting your cell phone. Many Android apps such as the Wifi analyzer app are available on Google Play. Download and analyze the signal strength in your location.
  • The mobile case or cover may hinder the receiving of the signal. So, test the wireless network signal strength with and without the case.
  • While using your neighbor’s connection, stay in a room that is closer to your neighbor’s access point.
  • If possible, configure the network setting to switch from 2.5 GHz to 5 GHz for a low traffic band.

My Parting Words

This is all about how to get a better wifi signal from neighbors.

I hope these tactics or steps can help you receive better wifi signal strength from long distances. However, which method will work best for you depends on the type of your equipment and the type of environment you’re living.

Don’t forget to thank your neighbors for internet sharing. Thanks for reading!

About Author